Hot Tub Water Treatment / Hot Tub Sanitizers

A practical and easy to use sanitizer for spa and hot tub water (dichlor).

1. Maintain recommended daily levels as determined by testing kit.

Free available chlorine: 3.0 - 5.0 ppm

pH: 7.2 - 7.8

Total alkalinity: 100 - 120 ppm

Calcium hardness: 150 – 200 ppm

2. Superchlorinate a freshly filled spa by adding 20 g of QUICK 100 per 1,000 L of spa water. Maintain water circulation at least 15 minutes before using. Repeat superchlorination procedure after each use period.

3. Maintain proper chlorine residual by adding 10 g of QUICK 100 per 1,000 L of spa water, daily or as needed.

4. Persistent foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer levels. To correct such conditions, superchlorinate spa water by adding 30 g of QUICK 100 per 1,000 L of spa water. Maintain circulation at least 30 minutes and wait 4 hours before using.

5. QUICK 100 contains stabilizer (cyanuric acid) which will accumulate in spa water. Keep stabilizer within the range of 30-100 ppm by dilution with fresh water.

6. For proper sanitation, spa must be completely drained periodically.

CHLORINE SANITATION:

Test chlorine levels daily.

Maintain a daily free available chlorine level of 3 – 5 ppm.

Use weekly and/or as required to superchlorinate and to ensure safe and enjoyable hot tub or spa water.

Test pH regularly and adjust to 7.2 – 7.8 to ensure proper water sanitation.

 

PRECAUTIONS:

CAUSES BURNS.

DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.

Always add chemicals to water, NEVER add water to chemicals!